other
Products

Outdoor Pole-mounted Circuit Breaker ZW32

The ZW32 intelligent complete set of pole-mounted circuit breaker is a new generation of integrated intelligent automatic vacuum circuit breaker. Suitable for protection and control in power distribution systems of substations and industrial and mining enterprises, and more suitable for rural power grids and frequently operated places.

  • Brand:

    TIANYI
  • Item NO.:

    ZW32
  • Order(MOQ):

    1
  • Payment:

    T/T 30%
  • Product Origin:

    FUZHOU,CHINA
  • Shipping Port:

    FUZHOU
  • Lead Time:

    30 days
  • Product Detail



  • Deep integration of isolation switch and vacuum switch
  • Comprehensive integration of secondary components and primary components
  • Positive pressure environmental protection gas lasting moisture-proof (the switch is filled with 0.02MP dry air, the annual leakage rate is less than 0.05%)
  • Protection grade reaches IP67, all-round waterproof
  • This pole mounted vacuum circuit breaker product has obtained the patent implementation license and has obtained the relevant type test report.



1. Altitude: ≤1000m.

2. Surrounding air temperature: upper limit +40 ° C, lower limit -25 ° C (alpine region) and -1 ° C (general region).

3. Relative humidity of surrounding air: when the maximum temperature is +40, it is not more than 50%. When the temperature is low, it is allowed to have a large relative humidity. Due to the change of temperature, it may occasionally has condensation effect.

4. Outdoor wind speed shall not exceed 34m/s.

5. The slope of the ground shall not exceed 3°.

6. The horizontal acceleration of the earthquake shall not more than 0.4m/s, and the vertical acceleration shall not morn than 0.2m/s;

7. The installation site shall be free from fire, explosion, serious pollution, chemical corrosion and violent vibration.

Note: if the actual conditions of use cannot be met, please negotiation with the manufacturer.




Q: Are you the manufacturer or trader?

A: We are both manufacturer & trader. We have our own manufacturer named TIANYI TONGYI ELECTRIC CO.,LTD, who have 27 years experience in electric industry. It covers an totally area of 117,000 m2 with 300 employees, also is a qualified supplier of China National Nuclear Corporation(CNNC) and main supplier for State Grid & China Southern Power Grid.


Q: What is your after-sales service?

A: We always provide free online service and technical support within 24 hours. 18 months warranty for customers.


Q: What is your delivery time?

A: Normally 25~35days. It depends on the order quantity and season. We have very strong capacity to produce top quality products, please inquiry us if you have any questions.


Q: What is the quality warranty time?

A: We have quality certificate CCC, CQC, ISO9001, CE ... Meanwhile, we can provide 18 months warranty for our products. Free online service and technical support within 24 hours is always provided to our customers.


Q: Do you accept ODM and OEM?

A: Yes. We have professional R & D teams to update and develop the latest technology. We also can support ODM or OEM, please send us details drawing to discuss.


Q: What is your payment terms?

A: Generally there are two payment terms:

a) 30% advance payment via T/T as a deposit, balance 70% against the shipping documents

b) Irrevocable L/C at sight


Q: If I want to visit you, how to go?

A: Our factory is located in Luoyuan County, Fuzhou City. Details address is Songshan Area, Taiwan Investment Zone, Luoyuan County, Fuzhou City, Fujian Province,China.

a) The nearest airport is Fuzhou Airport, if you come by air, please arrive in Fuzhou Airport, it takes 1 hour from the airport to our factory

b) The nearest train station is Luoyuan Station, if you come by train, please arrive in Luoyuan Station, it takes only 5 minutes to our factory.

Anyway, please contact us in advance, we will send the car to the airport or train station to pick you up.Sincerely welcome you to come and visit us.


Q: Do you need agents?

A: Yes, we welcome you to be a partner. Welcome to contact us for more information.




Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
# Related Products
Outdoor high voltage vacuum circuit breaker
Outdoor High Voltage SF6 Vacuum Circuit Breaker
Outdoor high voltage SF6 vacuum circuit breaker can be used for industrial and mining enterprises, power plants and substations as electrical equipment control and protection, suitable for frequent operation place.
11kv load break switch manufacturer
11kV Load Break Switch
11kV Load Break Switch is a control electrical appliance with a simple arc extinguishing device that can be used for load switching and switching circuits. It can switch on and off a certain load current and overload current, but cannot disconnect the short-circuit current.
11kv load break switch
High Current Load Break Switch
11kV Load Break Switch is a control electrical appliance with a simple arc extinguishing device that can be used for load switching and switching circuits. It can switch on and off a certain load current and overload current, but cannot disconnect the short-circuit current. It must be used in series with a high-voltage fuse, and the short-circuit current can be removed with the help of the fuse.
pole mounted VCB
ZW32 Outdoor High Voltage Isolation VCB Pole-Mounted
630A outdoor high voltage vacuum circuit breaker is suitable for 50Hz three-phase power system, mainly used for breaking and closing the load current, no-load current and short-circuit current of the urban 10kV power grid. It can also be used as a sub-switch for rural power grids and small power systems. It is an updated product for urban and rural power grids and rural oil-free power systems.
Low voltage switchgear manufacturer
GGD Fixed enclosed low-voltage switchgear assembly
GGD type fixed enclosed low-voltage switchgear is suitable for the power station, substation, industrial and mining enterprises and other power users. AC 50/60 Hz, rated working voltage to 660V, rated working current to 3150A. As power conversion, distribution and control for power, lighting and distribution equipment in a 50kA power distribution system.
High voltage vacuum switch cabinet
12kV High Voltage Vacuum Switch Cabinet
This fixed type high voltage vacuum switch cabinet are suitable for three-phase AC 50Hz/60Hz, rated voltage 12kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.
distribution box supplier
JP series low voltage integrated distribution box
JP series low voltage integrated distribution box,with ac 50/60 Hz, rated working voltage 400V, rated working current 630A,breaking capacity up to 15kA.As a low-voltage equipment used for power distribution, power metering, reactive power compensation and protection in power supply system.Can provide overload, short circuit and leakage protection.
Low voltage switchgear manufacturer
LV Switchgear GCS Power Distribution
LV Switchgear GCS Power Distribution,with three-phase AC frequency 50 (60) Hz, rated working voltage 380V (400), (600), rated current 4000A and below.A complete set of indoor low-voltage distribution equipment for power generation, power distribution in power supply system, centralized control of motor, and no power compensation.
Leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact