other
Products

JP series low voltage integrated distribution box

JP series low voltage integrated distribution box,with ac 50/60 Hz, rated working voltage 400V, rated working current 630A,breaking capacity up to 15kA.As a low-voltage equipment used for power distribution, power metering, reactive power compensation and protection in power supply system.Can provide overload, short circuit and leakage protection.

  • Item NO.:

    JP
  • Order(MOQ):

    1
  • Payment:

    T/T, LC at sight
  • Product Origin:

    FUZHOU,CHINA
  • Shipping Port:

    FUZHOU,CHINA
  • Lead Time:

    30 days
  • Product Detail


The low voltage integrated distribution box frame is made of stainless steel plate bending and welded. The shell frame can be treated with outdoor spraying process, which has better anti-corrosion performance. The internal beams and plates are galvanized and passivated by aluminum-zinc coated plates or cold-rolled steel plates. Self-adhesive sealing strip is affixed to the inside edge of the door, which can effectively prevent direct collision between the door and the box body, and also ensure the sealing and waterproof of the whole box body, improving the protection grade of the whole box body. Handling lifting lugs are set on both sides of the distribution box to meet the requirements of transportation and lifting. The distribution box has a maintenance light. When the door is opened, the maintenance light will be on.



NO.

Item

Unit

Date

1

Rated operational voltage

V

AC 380400

2

Rated insulation voltage

V

660690

3

Rated frequency

Hz

5060

4

Horizontal bus rated current

A

630

5

Main bus rated short-time withstand current

kA/1s

15

6

Bus rated peak withstand current

kA

30

7

Capacitor nominal capacity

kvar

200

8

Compensation

/

Single phase and three phase combined compensation

9

The component type of capacitor

/

Combination switch

10

IP grade

Use in outdoor

/

IP44


Distribution box should be installed in a clean, dry and well-ventilated environment.

1. Surrounding air temperature: the highest temperature is 40℃, and the average value measured within 24 hours does not exceed 35℃, and the lowest temperature is -5℃.

2. Relative humidity of the surrounding air: when the maximum temperature is +40℃, it shall not exceed 50%; when the temperature is lower, it is allowed to have a large relative humidity. The influence of condensation may occasionally occur due to the change of temperature should be considered.

3. Altitude:  ≤ 2000m.

4. Conditions of transportation, storage and placement: temperature range from -25℃ to +55℃, up to +70℃ in a short time (not exceeding 24 hours).The inclination of the equipment during installation shall not exceed 3º.

5. The installation site shall be free from fire, explosion, serious pollution, chemical corrosion and violent vibration.

6. The working conditions of instruments, measuring instruments, protective relays, etc. shall be in accordance with the requirements of the component supplier.

Note: if the actual conditions of use cannot be met, it shall negotiate with the manufacturer.



Q: Are you the distribution box manufacturer or trader?

A: We are both manufacturer & trader. We have our own manufacturer named TIANYI TONGYI ELECTRIC CO.,LTD, who have 27 years experience in electric industry. It covers an totally area of 117,000 m2 with 300 employees, also is a qualified supplier of China National Nuclear Corporation(CNNC) and main supplier for State Grid & China Southern Power Grid.


Q: What is your after-sales service?

A: We always provide free online service and technical support within 24 hours. 18 months warranty for customers.


Q: What is your delivery time?

A: Normally 25~35days. It depends on the order quantity and season. We have very strong capacity to produce top quality products, please inquiry us if you have any questions.


Q: What is the quality warranty time?

A: We have quality certificate CCC, CQC, ISO9001, CE ... Meanwhile, we can provide 18 months warranty for our products. Free online service and technical support within 24 hours is always provided to our customers.


Q: Do you accept ODM and OEM?

A: Yes. We have professional R & D teams to update and develop the latest technology. We also can support ODM or OEM, please send us details drawing to discuss.


Q: What is your payment terms?

A: Generally there are two payment terms:

a) 30% advance payment via T/T as a deposit, balance 70% against the shipping documents

b) Irrevocable L/C at sight


Q: If I want to visit you, how to go?

A: Our factory is located in Luoyuan County, Fuzhou City. Details address is Songshan Area, Taiwan Investment Zone, Luoyuan County, Fuzhou City, Fujian Province,China.

a) The nearest airport is Fuzhou Airport, if you come by air, please arrive in Fuzhou Airport, it takes 1 hour from the airport to our factory

b) The nearest train station is Luoyuan Station, if you come by train, please arrive in Luoyuan Station, it takes only 5 minutes to our factory.

Anyway, please contact us in advance, we will send the car to the airport or train station to pick you up.Sincerely welcome you to come and visit us.


Q: Do you need distribution box agents?

A: Yes, we welcome you to be a partner. Welcome to contact us for more information.





Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
# Related Products
metering box manufacturer
XC series low voltage metering box
XC series metering box is mainly used in office buildings, shops, hospitals, hotels, restaurants, high-rise buildings, workshops and other industrial and civil buildings, and is used as metering, lighting and power distribution.
cable branch box
XFW-20 Low voltage cable branch box
XWF-20 series low-voltage cable branch box is widely used in the three-phase low-voltage transmission and distribution system of outdoor public places such as power distribution stations, stations, industrial and mining enterprises, both sides of streets (highways), residential areas and high-rise buildings, etc. As a complete equipment used for distributing electrical energy by cable to other users or equipment.
distribution box size
XL series low voltage distribution box
XL series low voltage distribution box is suitable for power station, substation, industrial and mining enterprises, highway tunnel and other power users. In the power supply system with ac 50/60 Hz, rated working voltage 380V, rated working current up to 630A and breaking capacity up to 15kA, to provide power conversion, distribution and control for power distribution equipment such as power, lighting and blower. Can provide overload, short circuit and leakage protection.
PLC control cabinet manufacturer
Anti-explosion LV Frequency control box DFBK PLC control cabinet
LV Frequency control box DFBK PLC control cabinet is suitable for power station, substation, industrial and mining enterprises, highway tunnel and other power users. In the power supply system with ac 50/60 Hz, rated working voltage 380V, rated working current up to 630A and breaking capacity up to 15kA, to provide power conversion, distribution and control for power distribution equipment such as power, lighting and blower. Can provide overload, short circuit and leakage protection.
China JP distribution box manufacturer
JP series integrated distribution box
JP series integrated outdoor distribution box is suitable for 0.4kV voltage grade power distribution, metering, protection and automatic compensation of reactive power.
Outdoor distribution box
Outdoor stainless steel distribution box
JXF (indoor), JFF (outdoor) series wall-mounted electric control box is a kind of distribution box which is designed and assembled into various control functions according to the model, specification and quantity of components. The box body can be selected according to the size of the installation components.
stainless steel electric meter box
Three-door stainless steel electric metering box
Three-door stainless steel electric meter box, outdoor stainless steel three-phase meter box is the protection device of electricity meter.
pole mounted VCB
ZW32 Outdoor High Voltage Isolation VCB Pole-Mounted
630A outdoor high voltage vacuum circuit breaker is suitable for 50Hz three-phase power system, mainly used for breaking and closing the load current, no-load current and short-circuit current of the urban 10kV power grid. It can also be used as a sub-switch for rural power grids and small power systems. It is an updated product for urban and rural power grids and rural oil-free power systems.
Leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact